; ; Message file for NWSES ; ; $Revision: 1 $ ; [nwses] ; general -28000=An internal error occurred (bad state). -28001=An internal error occurred (session collection corrupt). -28002=An internal error occurred (output parameter NULL). -28003=An internal error occurred (input parameter out of range. -28004=A memory allocation error occurred. -28005=The server does not support the required functionality. -28006=An internal error occurred (unknown verb). -28007=An internal error occurred (compression/encryption initialization). ; handshaking -28112=The server has stopped before the session was fully established (write). -28113=The server has stopped before the session was fully established (read). ; nw access -28020=The SequeLink network module could not be loaded. -28021=The SequeLink network module entry point was not found. -28014=A packet overflow occurred. -29012=A network write failed; the connection was interrupted. -29013=A network read failed; the connection was interrupted. -29210=The server could not accept the connection request (Net_Init failed). -29211=The connection could not be made to the server. -29212=A network write failed; the connection was interrupted. -29213=A network read failed; the connection was interrupted. ; compression -28304=A memory allocation error occurred (compression). -28305=The server does not support compression; server version is too low. -28307=An internal error occurred (compression initialization). -28308=An error occurred during compression. -28309=An error occurred during decompression. -28312=A network write failed (compression initialization). -28313=A network read failed (compression initialization). -28320=The compression module could not be loaded. -28321=The compression entry point could not be found. -28330=The client preferences resource was not found (compression). -28331=The section [compression modules] was not found in client preferences resource. -28332=The requested compression method is not available on the client. ; encryption -28404=A memory allocation error occurred (encryption). -28405=The server does not support encryption; server version is too low. -28407=An internal error occurred (encryption initialization). -28408=An error occurred during encryption. -28409=An error occurred during decryption. -28412=A network write failed (encryption initialization). -28413=A network read failed (encryption initialization). -28420=The encryption module could not be loaded. -28421=The encryption entry point could not be found. -28430=The SequeLink client preferences resource was not found (encryption). -28431=The section [encryption modules] was not found in SequeLink client preferences resource. -28432=The requested encryption method is not available on the client. ; compression server errors -28504=A memory allocation error occurred (server compression). -28507=An internal error occurred (server compression initialization). -28508=An error occurred during compression in the server. -28509=An error occurred during decompression in the server. -28512=A network write failed (server compression initialization). -28513=A network read failed (server compression initialization). -28520=The server compression module could not be loaded. -28521=The server compression entry point could not be found. -28530=The service configuration resource was not found (compression). -28531=The section [compression modules] was not found in service configuration resource. -28532=The requested compression method is not available for the service. ; encryption server errors -28604=A memory allocation error occurred (server encryption). -28607=An internal error occurred (server encryption initialization). -28608=An error occurred during encryption in the server. -28609=An error occurred during decryption in the server. -28612=A network write failed (server encryption initialization). -28613=A network read failed (server encryption initialization). -28620=The server encryption module could not be loaded. -28621=The server encryption entry point could not be found. -28630=The service configuration resource was not found (encryption). -28631=The section [encryption modules] was not found in service configuration resource. -28632=The requested encryption method is not available for the service. [nw module] ; SequeLink for SNA ps -999=An internal error occurred (invalid state). ; SequeLink for TCP/IP(UDP) -4031=A network write failed; the connection was interrupted. -4041=A network read failed; the connection was interrupted. -4042=The response from the server was too large for the receive buffer. -4050=An error occurred while closing the socket. -4051=A network write failed (disconnect). -4060=An internal error occurred (bad transaction reference number). ; SequeLink for TCP/IP and SequeLink for TCP/IP(UDP) -4061=An internal error occurred (invalid reference number). -4062=The network session has been aborted. -4063=An internal error occurred (invalid state). -4064=An internal error occurred (invalid operation code). -4103=A network write failed; the connection was interrupted. -4104=A network read failed; the connection was interrupted. -4105=An error occurred while disconnecting. -4108=An internal error occurred (invalid reference number). ; SequeLink for CPIC -7105=An internal error occurred (invalid operation code). -7106=An internal error occurred (remove nwsb). -7107=An internal error occurred (invalid reference number). -7108=An internal error occurred (invalid state). -7109=An internal error occurred (error state). -7143=An error occurred while disconnecting (cmdeal(ABEND)). -7144=An error occurred while disconnecting (cmdeal(NORMAL)). -7145=A network write failed (cmsend). -7146=A network read failed (cmrcv). -7147=The conversation has been aborted by the partner LU or transaction program. -7148=The response from the server was too large for the receive buffer. ; SequeLink for Client Access -7205=An internal error occurred (invalid operation code). -7206=An internal error occurred (remove nwsb). -7207=An internal error occurred (invalid reference number). -7208=An internal error occurred (invalid state). -7209=An internal error occurred (error state). -7234=An error occurred while disconnecting (DEALLOC_ABEND). -7235=An error occurred while disconnecting (DEALLOC_NORMAL). -7236=A network write failed (SEND). -7237=A network read failed (RCV_WAIT). -7238=The conversation has been aborted by the partner LU or transaction program. -7239=The response from the server was too large for the receive buffer. -7240=The message is too large for the send buffer. ; SequeLink for TCP/IP -12801=The response from the server was too large for the receive buffer. -12802=The server has closed the session. -12803=The network session has been aborted. -12804=An internal error has occurred (syntax error in UAM encoding) . -12805=An internal error has occurred (session in use by another thread). -12808=An internal error has occurred (invalid user data length). -12809=An internal error has occurred (invalid session parameter) . -12810=An internal error has occurred (invalid flag values). -12811=An internal error has occurred (invalid parameters). -12812=An internal error has occurred (invalid state). -12813=An internal error has occurred (operation not allowed). -12816=No response was received from the server within the connection time out period. -12817=A memory allocation error occurred. -12818=There are not enough network resources available to establish the connection. -12819=An internal error has occurred (data pending). -12832=The transport layer could not be initialized. -12840=A connection could not be made to the specified TCP port on the specified IP address. -12848=An internal error has occurred (synchronization with transport attacher/inetd). -12856=An internal error has occurred (synchronization with session attacher). -12864=The server could not listen for incoming transport connections. -13055=An internal error has occurred (severe internal error). -13057=An internal error has occurred (disconnect indication). -13058=An internal error has occurred (more messages pending). -13059=An internal error has occurred (unexpected indication). -13060=The host user name/password combination is not valid. ; SequeLink for DECnet (stabilized) -20020=No server reference number or an invalid one was specified. -20021=The communication channel between the client and the server failed to accept any call. -20026=08S01:Notification failure during the Connect/Logon call. -20030=No server reference number or an invalid one was specified. -20031=The communication channel between the client and the server failed to accept any call. -20031=Notification failure during the Open call. -20050=No server reference number or an invalid one was specified. -20051=The release of the communication channel to a DECnet object failed. -20060=Transaction numbers are out of sequence. -20061=An existing but invalid server reference number has been used. -20061=In an error state because of a previous error condition. As a result the SequeLink Server and listener have been closed down. ; SequeLink for TCP/IP(UDP) -23000=Fault with network configuration. . -23001=IP configuration error; item is incorrect. -23002=IP or LAP configuration error; item is missing. -23003=Error in MacTCP load and boot process. -23004=An error occurred while obtaining a network address. MacTCP is configured to get its IP address either dynamically or from a server. This error occurred because it was unable to get an IP address. -23005=Connection is closing while other commands still have to return their result code. -23006=Invalid length. Length in parameter specification is incorrect. -23007=Connection exists. The request conflicts with existing connections(s). -23008=Connection does not exist; you are trying to issue a call while not connected. -23009=Insufficient resources to perform request. Most likely a memory shortage. -23010=Invalid pointer (StreamPtr) to the stream buffer. -23011=The stream you are trying to allocate is already open (streamAlreadyOpen) i.e. you are trying to allocate the same stream twice. -23012=08S01:Connection terminated. The host is not responding, the connection has broken down. -23013=Variable buffer is not defined (invalidBufPtr). -23014=Buffer descriptors are corrupted or incorrect (invalidWDS or invalidRDS). -23015=No socket opened at the host (openFailed). -23016=The timer on the host has interrupted the call before it was able to complete (commandTimeout). -23017=The same socket has been used for different connections (DuplicateSocket). -23032=Packet is too large to send without fragmenting. -23033=Destination is not responding. -23036=S1001:No memory to send fragmented packet. -23037=Unable to route packet off-net. -23041=Syntax error (SyntaxErr) in the host name. -23042=Caching memory is corrupted (CacheFault). -23043=The completion routine was not found (NoResultProc). -23044=Unable to find name of server (NoNameServer). -23045=Authorization failed (authNameErr). -23046=Internal MacTCP, Answer failed (noAnsErr). -23047=Internal MacTCP, Faulty descriptors (dnrErr). -23048=S1001:Memory allocation exceeded (outOfMemory). -25001=An unknown error occurred (-25001). -25002=An internal error occurred (-25002). -25003=An internal error occurred (-25003). -25004=An internal error occurred (-25004). -25011=An unknown error occurred (-25011). -25012=An internal error occurred (-25012). -25013=An internal error occurred (-25013). -25014=An unknown error occurred (-25014). -25015=An internal error occurred (-25015). -25021=An unknown error occurred (-25021). -25022=An internal error occurred (-25022). -25023=An internal error occurred (-25023). -25024=An internal error occurred (-25024). -25031=An unknown error occurred (-25031). -25032=An internal error occurred (-25032). -25033=An internal error occurred (-25033). -25041=An unknown error occurred (-25041). -25042=An internal error occurred (-25042). -25043=An internal error occurred (-25043). -25051=An unknown error occurred (-25051). -25052=An internal error occurred (-25052). [reason codes] -208=A connection error occurred. -210=A connection error occurred. -212=A connection error occurred. -213=A connection error occurred. -214=An invalid service name was specified. -215=An unknown DECnet node name was specified for the host address. -902=The MacAPPC driver could not be opened. -903=The 'SENT' resource could not be get. ; Reason codes returned by the SequeLink UDP listener -1000=The size of the connect string is not correct. -1001=The host user name is too long (max. 12 characters). -1002=The host password is too long (max. 31 characters). -1003=An internal error occurred (no end of packet). -1004=The service name is empty or it is too long (max. 32 characters). -1005=The service specified does not exist. -1020=The host user name/password combination is not valid. -1024=The service process could not be forked. -1028=The service process did not synchronize with the SequeLink UDP listener within the listener time out period. ; SequeLink for DECnet on Mac (stabilized) -2001=The TSSnet Driver has not been initialized at system startup. -2002=Not enough memory available for the client application. -2003=User Cancel request received while in Connection Dialog Box. -2004=The service name specified in the link parameter does not exist. -2005=The TSSnet or DECnet/Mac Driver reports an error while writing the connection request to the SequeLink for DECnet/VAX-VMS network module on the host. -2006=The TSSnet or DECnet/Mac Driver reports an error while waiting for a connection response from the SequeLink for DECnet/VAX-VMS network module on the host. -2007=The TSSnet or DECnet/Mac Driver failed to write connection request within the connect period (Request Time-out 60 seconds). -2009=A memory allocation error occurred while creating a connection control block. -2010=Invalid service buffer length. -2011=Address not found. Node name not defined in TSSnet or DECnet/Mac Node database. -2012=Invalid TSSHandle. -2013=The TSSnet or DECnet/Mac Driver reported an error while connecting to the SequeLink for DECnet/VAX-VMS network module or while waiting for a list of the available services. -2014=The TSSnet or DECnet/Mac Driver reported an error while connecting to the SequeLink for DECnet/VAX-VMS network module and is waiting for a list of available services on the chosen node. -2015=The TSSnet or DECnet/Mac Driver failed to make a connection to the host within the stated connection period (Services Request Time-out 10 seconds) or failed to get a list of services. -2016=The time stated in Services Request Time-out (10 seconds) passed and no list of services was received from the host. The TSSnet or DECnet/Mac Driver reported an error while reading the list of services on the host. -2017=Unable to assign a reference number. This is an internal error message and should not normally be issued. ; SequeLink for TCP/IP(UDP) -4000=The host name is too long (max. 20 characters). -4001=An internal error has occurred (null link parameters string). -4002=The host name or server address is too long (max. 24 characters). -4003=The service name is either 0 or too long (max. 32 characters). -4004=The host user name is too long (max. 12 characters). -4005=The password is too long (max. 31 characters). -4006=An internal error has occurred. -4007=The symbolic host name could not be resolved to an IP address. -4008=An incorrect dotted format for the IP address has been specified. -4009=The host name begins with an inappropriate leading character. -4010=The specified port number is out of range. The port must be in the range of 1025 to 32767. -4011=The creation of a UDP socket on the client failed. -4012=An error occurred while trying to send a data gram to the server. -4013=An error occurred while trying to receive a data gram from the server. -4014=The connection could not be established before the client time-out occurred. -4015=The connection process was interrupted by a CTRL/C key sequence. -4016=An internal error has occurred (no or zero sized response). -4017=An internal error has occurred (unknown packet response from server). -4018=The service name could not be resolved to a TCP port number. -4021=The creation of a TCP socket on the client failed. -4022=The TCP connection to the service process failed. The service process has not started or it has exited prematurely. -4060=An internal error occurred (bad transaction reference number). -4061=An internal error occurred (invalid reference number). -4062=An internal error occurred (error state). -4063=An internal error occurred (invalid state). -4064=An internal error occurred (invalid operation code). -4070=A memory allocation error occurred while creating a connection control block. -4071=The maximum number of connections on the client has been reached. -4072=An error occurred while binding the UDP socket. -4073=An error occurred while connecting the UDP socket. -4074=An error occurred while initializing winsock. -4097=The TCP NODELAY option is not set. -4098=An error occurred while getting the TCP NODELAY option. -4099=An error occurred while setting the TCP NODELAY option. ; Network modules on Mac -4101=A network failure has been detected. -4102=The network connection could not be made. -4109=The length of the connection parameters is too large. -4112=No response was received from the server within the connection time out period. -4113=The host is not responding. -4114=An internal error occurred (unknown packet). -4115=An incorrect dotted format for the IP address has been specified. ; SequeLink for CPIC -7101=An internal error occurred (null connect string). -7102=The maximum number of connections on the client has been reached. -7103=A memory allocation failure has occurred. -7104=The CPIC network stack has not been initialized. -7105=An internal error occurred (invalid operation code). -7106=An internal error occurred (remove nwsb). -7107=An internal error occurred (invalid reference number). -7108=An internal error occurred (invalid state). -7109=An internal error occurred (error state). -7121=The symbolic destination name has an invalid length. -7122=The host user name has an invalid length. -7123=The password has an invalid length. -7127=The symbolic destination parameter is invalid. -7128=The initialization of the conversation failed. -7129=Setting the security type to PROGRAM failed. -7130=Setting the security type to NONE failed. -7131=A CPIC communication function failed (xcscsu). -7132=A CPIC communication function failed (xcscsp). -7133=A CPIC communication function failed (cmsst(CM_SEND_AND_PREP_TO_RECEIVE)). -7134=Allocate request is issued with wrong parameters (Partner LU, ModeName or Transaction Program). -7135=Allocate request failed (no retry). -7136=Allocate request failed (retry). -7137=Allocate request failed. -7138=The partner LU does not recognize the given transaction program. -7139=The remote transaction program has wrong conversation attributes. -7140=The partner LU has problems starting up the remote transaction program (no retry). -7141=The partner LU has problems starting up the remote transaction program (retry). -7145=A network write failed (cmsend). -7146=A network read failed (cmrcv). -7147=The conversation has been aborted by the partner LU or transaction program. -7148=The response from the server was too large for the receive buffer. ; SequeLink for Client Access -7201=An internal error occurred (null connect string). -7202=The maximum number of connections on the client has been reached. -7203=A memory allocation failure has occurred. -7204=The Client Access router or PCSWIN has not been loaded. -7205=An internal error occurred (invalid operation code). -7206=An internal error occurred (remove nwsb). -7207=An internal error occurred (invalid reference number). -7208=An internal error occurred (invalid state). -7209=An internal error occurred (error state). -7221=The system name has an invalid length. -7222=The transaction program name has an invalid length. -7223=The host user name has an invalid length. -7224=The password has an invalid length. -7225=The system name is invalid. -7226=Allocate request is issued with wrong parameters. -7227=Allocate request failed (no retry). -7228=Allocate request failed (retry). -7229=Allocate request failed. -7230=The partner LU does not recognize the given transaction program. -7231=The remote transaction program has wrong conversation attributes. -7232=The partner LU has problems starting up the remote transaction program (no retry). -7233=The partner LU has problems starting up the remote transaction program (retry). -7236=A network write failed (SEND). -7237=A network read failed (RCV_WAIT). -7238=The conversation has been aborted by the partner LU or transaction program. -7239=The response from the server was too large for the receive buffer. -7240=The message is too large for the send buffer. ; SequeLink for TCP/IP -12801=The response from the server was too large for the receive buffer. -12802=The server has closed the session. -12803=The network session has been aborted. -12804=An internal error has occurred (syntax error in UAM encoding) . -12805=An internal error has occurred (session in use by another thread). -12808=An internal error has occurred (invalid user data length). -12809=An internal error has occurred (invalid session parameter) . -12810=An internal error has occurred (invalid flag values). -12811=An internal error has occurred (invalid parameters). -12812=An internal error has occurred (invalid state). -12813=An internal error has occurred (operation not allowed). -12816=No response was received from the server within the connection time out period. -12817=A memory allocation error occurred. -12818=There are not enough network resources available to establish the connection. -12819=An internal error has occurred (data pending). -12832=The transport layer could not be initialized. -12840=A connection could not be made to the specified TCP port on the specified IP address. -12848=An internal error has occurred (synchronization with transport attacher/inetd). -12856=An internal error has occurred (synchronization with session attacher). -12864=The server could not listen for incoming transport connections. -12870=The host user does not exist. -12871=The host password is invalid. -12873=The host password has expired. -12874=The service process failed to change to the home directory of the user. -12875=The host user is disabled. -12876=The host user name is too long. -12877=The Windows NT domain name is too long. -12878=A host user name/password combination is required. -12879=The service configuration resource could not be found. -12880=The host user is locked. -13055=An internal error has occurred (severe internal error). -13057=An internal error has occurred (disconnect indication). -13058=An internal error has occurred (more messages pending). -13059=An internal error has occurred (unexpected indication). -13060=The connection was refused by the server.